Specifies the name of the Application Interface Message Partner. The Message Partner basically identifies an application that sends and receives messages on behalf of a user.

The name of the Application Interface Message Partner.

This property is mandatory.

Specifies the cryptographic mode for Relaxed SNL Protocol:

• Empty (blank) indicates automatic mode.

• Advanced: indicates advanced mode.

  Relaxed SNL Protocol does not support manual cryptographic mode.

Advanced or blank indicating the selected Context ID.

The configured default is Advanced.

Specifies the format of the current message. Each of the names of the required values denotes a SWIFT Alliance Gateway message format.

The default value is Sag:RelaxedSNL.

Note - This property is grayed out to indicate that the property is not configurable.

Specifies the name of the SWIFT Alliance Gateway Sender. This is an SAG operator.

The name of the sender.

Specifies the password of the SAG operator.

The SAG operator password.

Specifies the construction/marshalling of SNL primitives.

When the SWIFT AG Adapter constructs/marshals the SNL primitives, this flag indicates whether the adapter includes the XML attributes in the primitives. For example:

• For element SwInt:Requestor, including XML attributes, is as follows:

  <SwInt:Requestor type="Sw.Gbl.DN" 
  version="4.0.0">o=swift,o=swift</
  SwInt:Requestor>

• If you do not include XML attributes, as follows:

  <SwInt:Requestor>o=swift,o=swift
  </SwInt:Requestor>

  If not include XML attributes.

  Note - All XML attributes in SNL Primitives are defined in SNL Specification.

True or False.

True indicates that the adapter includes the XML attributes in the primitives.

The configured default is False.

Specifies the maximum time (in milliseconds) allowed between a request message and its corresponding response message.

An integer indicating the maximum time allowed between a request message and its corresponding response message in milliseconds (for example, 300000 equals 5 minutes).

The configured default is 300000.

Specifies the maximum time (in milliseconds) to block a read operation.

An integer indicating the maximum time in milliseconds to block a read operation (for example, 60000 equals 1 minute).

The configured default is 60000.

Specifies the SwSec_UserDN, full distinguished name used to identify and authenticate the principal.

Size is limited to 100 bytes.

The User DN (distinguished name) ending with o=<BIC8>,o=swift

For example, cn=dandrews,o=bankn14b,o=swift

Specifies the SwInt_Requestor, used to identify the Application entity name.

Size is limited to 100 bytes.

The Requestor DN (distinguished name) ending with o=<SWIFTNet institution BIC-8>,o=swift

For example, ou=management,o=bankn14b,o=swift

Specifies the SwInt_Responder, used to identify the intended responder.

Size is limited to 100 bytes.

The Responder DN (distinguished name) ending with o=<SWIFTNet institution BIC-8>,o=swift

For example, cn=management,o=swift,o=swift

Specifies the SwInt_Service, the Service Name containing the SWIFTNet service used.

Size is limited to 30 bytes.

The Service Name.

For example, swift.cte, swift.generic.ia!x, swift.generic.iast!x, and so forth.

Specifies the SwInt_RequestType, used to identify the message type of the XML message using the standard message code.

Size is limited to 30 bytes.

The Request Type.

For example, camt.005.001.02 (GetTransaction)

Specifies the SwInt_RequestRef. This is used to associate a request message with subsequent response or error messages.

Size is limited to 30 bytes.

A user reference of 30 bytes or less.

Specifies whether the request contains Crypto operations to be performed. Only the last Crypto block is analyzed. SwInt_RequestCrypto (digital signature).

True or False.

True indicates that the request contains Crypto operations to be performed.

The configured default is False.

Specifies the SwInt_Priority. The priority of delivery. In the future, SWIFTNet may implement this priority through schemes such as top-queuing, dedicated server processes, network transport priority. In the current implementation, differentiation on priority may be used for store-and-forward delivery.

Normal or Urgent.

The configured default is Normal.

Specifies whether SwInt_NRIndicator, non-repudiation support is being requested.

True or False.

True indicates that non-repudiation is requested.

The configured default is False.

Specifies the SwInt_NotifQueue, store-and-forward delivery mode. When a value is present, it indicates SnF delivery mode and the queue where SnF delivery notifications are received.

In the case of non-delivery (Rejected or Failed message), an SnF failed notification is always generated in this notification queue.

In the case of delivery (Accepted or Duplicated message) an SnF delivery notification is optionally generated in this queue.

For store-and-forward delivery mode, enter the name of the delivery notification queue.

Size is limited to 30 bytes.

For example, ptsauszz_generic!x. (see Sw:DeliveryNotif)

Specifies Sw_DeliveryNotif, delivery notification. This is for store-and-forward delivery mode only. Indicates whether a delivery notification is required in case of successful delivery (Accepted or Duplicated).

True or False.

True indicates that a delivery notification is required.

The configured default is False.

Specifies the name of the queue (SwInt_Queue).

The User SwInt_Queue.

For example, ptsauszz_generic!x

Size is limited to 30 bytes.

Specifies the Sw_ForceAcquire. Indicates whether an acquisition request must be accepted in case the queue is already acquired.

True or False.

True indicates that an acquisition request must be accepted.

The configured default is True.

Specifies the usage mode of the queue.

This property is purposely disabled.

The default setting is Pull.

Pull is the correct setting for client mode.

Note - This property is purposely disabled.

Specifies the Sw_OrderBy. Indicates the order priority in which the messages are retrieved on the queue. The options are:

• InterAct

• Blank, indicates FIFO (first in, first out)

• FileAct

• Urgent

InterAct, blank, FileAct, or Urgent.

The configured default is InterAct.

Specifies the Sw_RecoveryMode. Indicates whether the session must be opened in recovery mode. Messages that already have an output sequence number are sent first, before considering the selected order.

True or False.

True indicates that the session must be opened in recovery mode.

The configured default is False.

Specifies the SwSec_UserDN. Used to identify and authenticate the principal. Size is limited to 100 bytes.

The User DN (distinguished name) ending with o=<BIC8>,o=swift

For example, cn=dandrews,o=bankn14b,o=swift

Specifies the SwInt_Requestor, the Application entity name. Size is limited to 100 bytes.

The Requestor DN (distinguished name) ending with o=<SWIFTNet institution BIC-8>,o=swift

For example, ou=management,o=bankn14b,o=swift

Specifies the SwInt_Responder, the name of the intended responder. Size is limited to 100 bytes.

The Responder DN (distinguished name) ending with o=<SWIFTNet institution BIC-8>,o=swift

For example, cn=management,o=swift,o=swift

Specifies the SwInt_Service, the Service Name containing the SWIFTNet service used. Size is limited to 30 bytes.

The Service Name.

For example, swift.cte, swift.generic.fa!x, swift.generic.fast!x, and so forth.

Specifies the SwInt_RequestType, used to identify the message type of the XML message using the standard message code. Size is limited to 30 bytes.

The Request Type.

For example, camt.005.001.02 (GetTransaction)

Specifies the SwInt_RequestRef. This is used to associate a request message with subsequent response or error messages. Size is limited to 30 bytes.

A user reference of 30 bytes or less.

Specifies whether the request contains Crypto operations to be performed. Only the last Crypto block is analyzed. SwInt_RequestCrypto (digital signature).

True or False.

True indicates that the request contains Crypto operations to be performed.

The configured default is False.

Specifies the SwInt_Priority. The priority of delivery. In the future, SWIFTNet may implement this priority through schemes such as top-queuing, dedicated server processes, network transport priority. In the current implementation, differentiation on priority may be used for store-and-forward delivery.

Normal or Urgent.

The configured default is Normal.

Specifies whether SwInt_NRIndicator, non-repudiation support is being requested.

True or False.

True indicates that non-repudiation is requested.

The configured default is False.

Specifies the SwInt_NotifQueue, store-and-forward delivery mode. When a value is present, it indicates SnF delivery mode and the queue where SnF delivery notifications are received.

In the case of non-delivery (Rejected or Failed message), an SnF failed notification is always generated in this notification queue.

In the case of delivery (Accepted or Duplicated message) an SnF delivery notification is optionally generated in this queue.

For store-and-forward delivery mode, enter the name of the delivery notification queue.

Size is limited to 30 bytes.

For example, ptsauszz_generic!x. (see Sw:DeliveryNotif).

Specifies Sw_DeliveryNotif, delivery notification. This is for store-and-forward delivery mode only. Indicates whether a delivery notification is required in case of successful delivery (Accepted or Duplicated).

True or False.

True indicates that a delivery notification is required.

The configured default is False.

Specifies the Sw_TransferEP, the Transfer EndPoint name used for the remote file handler. Value options:

• Blank value: indicates that the file transfer does not use the remote file handler.

• Transfer EndPoint name: When this value is present, the file transfer uses the remote file handler.

  Before the file transfer starts you need to start the remote file handler process with the specified Transfer EndPoint name on your system. The command to start the remote file handler (swfa_handler) requires the command-line arguments:

  swfa_handler <HostName>:<PortNumber>[:ssl] <TransferEndpoint> [<Process ID>]

  Here are some examples:

  1. swfa_handler snlhost:48003:ssl MyUniqueEndpoint 23450

  2. swfa_handler snlhost:48003 MyUniqueEndpoint 23450

  3. swfa_handler snlhost:48003 MyUniqueEndpoint

  As for the syntax details and operational guidelines of remote file handler, refer to the SWIFTNet Service Design Guide or contact the system administrator.

The Transfer EndPoint name used for the remote file handler.

Size is limited to 30 bytes.

Specifies BlockFileTransfer. This indicates whether the function call will finish when a final file status is returned.

This may be useful for the large file transfers.

The final status values for file transfer are,

• Completed

• Duplicated

• Aborted

• Failed

• Rejected

• Unknown

True or False.

True indicates that the function call will finish when a final file status is returned.

The configured default is True.

Specifies the SwInt_Queue.

For example, ptsauszz_generic!x. Size is limited to 30 bytes.

The User SwInt_Queue.

For example, ptsauszz_generic!x

Specifies the Sw_ForceAcquire.

Indicates whether an acquisition request must be accepted if a queue is already acquired.

True or False.

True indicates that an acquisition request must be accepted.

The configured default is True.

Specifies the usage mode of the queue.

This property is purposely disabled.

The default setting is Pull. Pull is the correct setting for client mode.

Note - This property is purposely disabled.

Specifies the Sw_OrderBy.

Indicates the order priority in which the messages are retrieved on the queue. The options are:

• InterAct

• Blank: indicates FIFO (first in, first out).

• FileAct

• Urgent

InterAct, blank, FileAct, or Urgent.

The configured default is FileAct.

Specifies the Sw_RecoveryMode.

Indicates whether the session must be opened in recovery mode. Messages that already have an output sequence number are sent first, before considering the selected order.

True or False.

True indicates that the session must be opened in recovery mode.

The configured default is False.

Specifies the Sw_TransferDescription, user information about the file transfer. Free text.

Size is limited to 256 bytes.

The transfer description.

Specifies the Sw_TransferInfo, user information about the file transfer. Structured data that can be analyzed by the server.

Size is limited to 256 bytes.

The transfer information.

Specifies the Sw_LogicalName, the logical name of the file to get. This name is communicated to the server application. By default, this name is the physical name without path.

Size is limited to 254 bytes.

The logical file name.

Specifies the Sw_PhysicalName, the full physical name where the file to get must be stored. If the file already exists it is overwritten.

Size is limited to 254 bytes.

The physical file name.

Specifies the Sw_MaxSize, the maximum accepted file size. When a value is present, the maximum size is a field that is communicated from the client application to the server application.

This property is optional. Size range is 0 to 250 Megabytes.

The maximum file size.

Specifies the Sw_TransferDescription, This is information about the file transfer. Free text.

Size is limited to 256 bytes.

The transfer description.

Specifies the Sw_TransferInfo, information about the file transfer. This is structured data that can be analyzed by the server.

Size is limited to 256 bytes.

The transfer information.

Specifies the Sw_LogicalName, the logical name of the file to put. This name is communicated to the server application. By default, this name is the physical name without path.

Size is limited to 254 bytes.

The logical file name.

Specifies the Sw_PhysicalName, the full physical name of the file to put.

Size is limited to 254 bytes.

The physical file name.

Specifies the Sw_FileDescription. This is user information about the file. Free text.

Size is limited to 256 bytes.

The file description.

Specifies the Sw_FileInfo, user information about the file. This is structured data that can be analyzed by the server.

Size is limited to 256 bytes.

The file information.

Specifies the Sw_PhysicalName, the full physical name where the file is stored locally.

Size is limited to 254 bytes.

The physical file name.

Specifies whether to ALWAYS try to create a new connection for a connection establishment request. The options are:

• True: A new connection is always created without trying to match an existing connection.

• False: An attempt to match an existing connection (managed by container) is made.

True or False.

The configured default is False.

Specifies whether the adapter closes the connection automatically after the work is finished on the connection.

• True: The connection is not re-used.

• False: The connection is returned to the pool for reuse.

True or False.

The configured default is False.