Using JBI Components

Using JBI Components

Review JBI component documentation topics.

Attention:The current documentation for Java CAPS is located at the Java CAPS Documentation Center. The documents on this page are no longer maintained and do not reflect the latest version of Java CAPS.

Configuring JBI Components
- Configuring WSDL Extensibility Elements
- HTTP WSDL Extensibility Elements
  - HTTP Connectivity
  - HTTP Binding
- SOAP WSDL Extensibility Elements
  - SOAP Connectivity
  - SOAP Binding
- Configuring JBI Runtime Properties
- Configuring the BPEL Service Engine Runtime Properties
- HTTP Binding Component Runtime Properties
- Configuring BPEL Service Engine Clustering and Failover
- Configuring the HTTP Binding Component for Clustering
Administering JBI Components for Java CAPS
- JBI Component Overview
  - Life Cycle States Within the JBI Framework
- JBI Administration Tools Overview
- Using the JBI Manager in the NetBeans IDE to Administer JBI Components
- Using the Admin Console to Administer JBI Components
  - Starting the Admin Console
  - Administering JBI Components from the Admin Console
- Using the asadmin Administrative Command Line Interface (CLI) to Administer JBI Components
Using the Java EE Service Engine in a Project
- About the Java EE Service Engine
- Java EE Service Engine Features
- Java EE Service Engine Limitations
- Java EE Service Engine Use Case Scenarios
- Java EE Service Engine as Service Provider and Service Consumer
  - Java EE Service Engine as a Service Provider
  - Java EE Service Engine as a Service Consumer
- Java EE Service Engine Example Scenario
  - Scenario Message Flow
- NetBeans Tooling Support for the Java EE Service Engine
- Software Requirements and Installation
- Configuring and Starting the Java EE Service Engine
- Administering the Java EE Service Engine
  - To View the General Properties
  - Java EE Service Engine Log Management
- Java EE Service Engine Deployment Articrafts
Using the Java EE Service Engine to Create a Composite Application
- Tutorial Requirements
  - Prerequisites
  - System Requirements
- Tutorial Scenario
- Configuring the Tutorial Environment
- Creating an EJB Module Project
- Creating a Composite Application Project
  - To Create a Composite Application Project
- Building and Deploying the Composite Application Project
  - To Build and Deploy the Composite Application
- Testing the Composite Application
  - To Add a Test Case
  - To Run the Test Case
- Summary
Using the BPEL Designer and Service Engine
- Overview
  - The JBI Runtime Environment
  - The BPEL Designer
  - The BPEL Service Engine
  - The Composite Application Project
- BPEL Designer and Service Engine Features
- Understanding the BPEL Module Project
  - Creating Sample Processes in the BPEL Designer
- Navigating in the BPEL Designer
  - The BPEL Designer Window
  - The BPEL Editor Views
  - The Navigator Window
  - The Properties Window
  - Scrolling
  - Collapsing and Expanding Process Blocks in the Diagram
  - Zooming In and Out of the Diagram
  - Printing BPEL Diagrams and Source Files
- Creating a BPEL Module Project
  - Software Requirements and Installation
  - Starting GlassFish
  - Creating a new BPEL Module Project
  - Creating the XML Schema and the WSDL Document
  - Creating a BPEL Process Using the BPEL Designer
  - Creating a Composite Application Project
  - Building and Deploying the Composite Application Project
  - Testing the Composite Application
  - Summary
- Developing a BPEL Process Using the Diagram
  - The BPEL Diagram
  - Configuring Element Properties in the Design View
  - Finding Usages of BPEL Components
  - Saving Your Changes
- The BPEL Designer Palette Elements
  - Placeholders
  - The Process Element
  - The Web Service Elements
  - Using the Invoke Element
  - Using the Receive Element
  - Using the Reply Element
  - Using the Partner Link Element
  - The Basic Activities
  - Using the Assign Element
  - Using the Empty Element
  - Using the Wait Element
  - Using the Throw Element
  - Using the Rethrow Element
  - Using the Exit Element
  - Using the Compensate Element
  - Using the CompensateScope Element
  - The Structured Activities
  - Using the If Element
  - Using the While Element
  - Using the Repeat Until Element
  - Using the For Each Element
  - Using the Pick Element
  - Using the Flow Element
  - Using the Sequence Element
  - Using the Scope Element
- Using the BPEL Mapper
  - About the BPEL Mapper
  - Creating BPEL Mappings
  - Working with Predicates
  - XPath Function Reference
  - Mapping Examples
  - Using Type Cast and Pseudo-Components
- Using Normalized Message Properties
  - Using Normalized Message Properties in a BPEL Process
  - General Normalized Message Properties
- Using Handlers
  - Using a Fault Handler
  - Using an Event Handler
  - Using a Compensation Handler
  - Using a Termination Handler
- Using Correlation
  - Understanding Correlation. Using the Correlation Wizard
- Validation
  - Validation Criteria
  - Validation Types
  - Notifications
- BPEL Process Logging and Alerting
  - Defining Logging
  - Defining Alerting
- Configuring the BPEL Service Engine Runtime Properties
  - Accessing the BPEL Service Engine Runtime Properrties
  - Runtime Property Descriptions
- BPEL Service Engine Deployment Artifacts
- Testing and Debugging BPEL Processes
  - Testing a BPEL Process
  - Debugging BPEL Processes
  - BPEL Debugger Windows
- Monitoring the BPEL Service Engine
  - Installing the BPEL Monitor API and Command Line Monitoring Tool
  - Using the BPEL Monitor Command Line Tool
- Configuring Quality of Service (QOS) Properties, Throttling, and Redelivery
  - Configuring the Quality of Service Properties
  - Quality of Service Properties
  - Configuring Message Throttling
  - Configuring Redelivery
- Configuring Persistence for the BPEL Service Engine
  - Configuring the User and Database for Persistence
  - Creating an XA Connection Pool and a JDBC Resource
  - Creating a Non-XA Connection Pool and JDBC Resource
  - Enabling Persistence for the BPEL Service Engine
  - Truncating and Dropping Tables
- Configuring Failover for the BPEL Service Engine
  - Failover Considerations
- BPEL BluePrints
- Troubleshooting
  - Using BPEL Schemas Different from the BPEL 2.0 Specification
  - Ports
  - Travel Reservation Service Endpoint Conflict
  - Test Run
  - Test Run Failures
  - Disabling Firewalls when Using Servers
  - Required Correlation Set Usage is Not Detected by the Validation System
Using the HTTP Binding Component
- About the HTTP Binding Component
- HTTP/SOAP Binding Architecture
- HTTP Binding Component Features
- Service Provider Features
- Service Consumer Features
- Security Features
- HTTP Binding Component Example Scenario
  - Purchase Order Example
- SOAP Processing
- SOAP 1.1 WSDL Extensibility Elements
  - SOAP 1.1 Connectivity Element
  - SOAP 1.1 Binding Elements
- SOAP 1.2 WSDL Extensibility Elements
  - SOAP 1.2 Connectivity Element
  - SOAP 1.2 Binding Elements
- WS-I Basic Profile 1.1
- HTTP Processing
- HTTP WSDL Extensibility Elements
  - HTTP Connectivity Element
  - HTTP Binding Elements
- HTTP GET and POST Processing
- XML/HTTP GET Processing
  - Configuring the HTTP Binding Component for HTTP Get Interactions
  - Binding Details
- Using the HTTP Binding Component with the HTTP POST Method
  - Configuring the HTTP Binding Component for HTTP Get Interactions
  - Binding Details
  - HTTP POST Treatment of http:urlEncoded and http:urlReplacement
- HTTP Binding Component Runtime Properties
- Using Normalized Message Properties to Propagate Binding Context Information
  - Using Normalized Message Properties in a BPEL Process
  - Normalized Message Properties
- Quality of Service (QOS) Features
  - Configuring the Quality of Service Properties
  - Message Throttling: Configuring and Using
  - Redelivery: Configuring and Using
- Using the Tango Web Service Features with the HTTP Binding Component
  - Configuring Reliable Message Delivery
- Configuring the Tango Web Services Attributes exposed by the HTTP Binding Component
  - Accessing the Tango (WSIT) Web Service Attribute Configuration
  - Server Configuration--Web Service Attributes
  - Client Configuration -- Web Service Attributes
- HTTP Binding Component Security
  - Using Basic Authentication with the HTTP Binding Component
  - Configuring Security Mechanisms
- Using Application Variables to Define Name/Value Pairs
  - Using Application Variables for password protection
- Using Application Configuration to Configure Connectivity Parameters
  - To apply a named ConfigExtension to the Application Configuration
- Enhanced Logging
- Statistics Monitoring
- Using WS-Transaction
- Clustering Support for the HTTP Binding Component
  - HTTP Load Balancer
  - Configuring the HTTP Binding Component for Clustering
- Common User Scenarios
  - Validating HTTP Extensibility Elements from the WSDL Editor
  - Adding a SOAP Template to a WSDL Document
  - Adding an HTTP Template to a WSDL Document
  - Web Service Client Calling an Operation Using HTTP Basic Authentication
  - Web Service Implementing an Operation Protected by HTTP Basic Authentication
  - Web Service Client Calling an Operation Using SSL Authentication
  - Web Service Implements an Operation Protected by SSL Authentication
Processing an Order in a Purchase Order System
- Tutorial Requirements
- Project Overview
  - Scenario Message Flow
  - Core System Pieces
- Configuring the Tutorial Environment
- Creating a New Project
  - To Create a New Project
- Creating the XML Schemas
  - Creating the inventory.xsd Schema
  - Creating the purchaseOrder.xsd Schema
- Creating and Configuring the WSDL Documents
  - Creating the InventoryService WSDL Document
  - Creating the POService WSDL Document
- Creating the InventoryService BPEL Process
- Create the POService BPEL Process
- Building the Project
  - To compile and package the project
- Creating and Deploying the Composite Application
  - To create the Composite Application project and add the JBI module
  - To build and deploy the Composite Application
- Testing the HTTP Binding Component Sample Project
  - To run the HTTP-SOAP-PO-JBI project
- Project Summary
Designing Custom Encoders
- Understanding the Encoder Framework
  - Abstract Message Structure
- Creating the Abstract Message Definition
  - To Apply the Custom Encoder to an XSD
- Editing Encoding Properties
  - Encoding Properties
  - Data Encoding
- Matching Data Patterns
  - Defining Byte Patterns
  - Specifying Pattern Alignment
- Specifying Delimiters
- Defining a Delimiter List
  - To create a delimiter list
- Validating and Testing the Custom Message Definition
  - Validating the Custom Message Definition
  - Testing the Encoder Runtime Behavior
- Using Custom Encoders in JBI Projects
  - To Use a Custom Encoder in a JBI Project
- About Data Parsing and Serialization
Using the XSLT Editor
- About the XSLT Service Engine
- XSLT Service Engine Features
- Runtime Properties
- Configuring the XSLT Service Engine
XSLT Designer: Simple Transformation Tutorial
- Overview
- Configuring the Tutorial Environment
- Creating the XSLT Module Project
  - To create a new XSLT Module Project:
- Creating XML Schemas
  - To create the XML Schema for the incoming message:
  - To create the XML Schema for the outgoing message:
- Creating a WSDL File
  - To create a WSDL file:
- Creating an XSLT Service
  - To create and XSLT Service:
  - To populate the XSL stylesheet:
- Creating and Deploying the Composite Application
- Performing a Test Run of the XSL Transformation Service
  - To create a test case:
  - To perform a test run:
Using the File Binding Component
- Tutorial Requirements
  - Prerequisites
  - System Requirements
- Configuring the Tutorial Environment
- Creating a BPEL Module Project
- Creating a Composite Application Project
  - To Create a Composite Application Project
- Building and Deploying the Composite Application Project
  - To Build and Deploy the Composite Application
- Testing the Composite Application
  - To Test the PollWriteCompApp Composite Application
- Summary
Using the File Binding Component in a Project
- About the File Binding Component
- File Binding Component Features
- Common User Scenarios
- Runtime Configuration
- Configuring File BC WSDL Attributes
- Inbound Message Processing
  - File Binding Component Processing Protocol
- Persisted Sequencing
  - Mapping Persisted Sequences to File Based Persistences
  - Outbound Message Processing
- Application Variable Support
- Application Configuration Support
- Processing Protocols and Capabilities
  - Inbound Processing
  - Outbound Processing
- Normalized Message Properties
  - Normalized Message Properties Defined by the File Binding Component
  - General Normalized Message Properties
- Consistent Logging Strategies
- Message Exchange Redelivery Capability
  - Configuring Redelivery
  - To Configure Redelivery
- Endpoints Statistics and Monitoring Management
- Throttling and Serial Processing
  - To Configure Throttling
Using the JMS Binding Component
- JMS Binding Component Overview
- JMS Binding Component Features
- JMS Binding Component Scenarios
- Creating JMS-Based Concrete WSDL Documents
- Connecting to the JMS Server
  - Specifying the Protocol, Server, and Port
  - Connecting to the JMS Server by Using JNDI
- Configuring Redelivery Handling
  - Configuring Redelivery Handling from the Wizard
  - Configuring Redelivery Handling by Editing the WSDL Document
- Using the Normalized Message Properties
- JMS WSDL Extensibility Elements
  - JMS Connectivity Elements
  - JMS Binding Elements
- JMS Binding Component Clustering
Understanding the FTP Binding Component
- FTP Binding Component -- Overview
- Supporting Features in the FTP Binding Component
  - Systemic Qualities Implemented in the FTP Binding Component
- Invoking Messages in FTP Binding and Synchronous Request-Response Service
  - Correlating a Request-Response
- Message Transportation Through FTP Binding Component
Using the FTP Binding Component in a Project
- Tutorial Overview
- Tutorial Requirement
  - Software Needed for the Tutorial
- Tutorial Plan
- FTP Binding Component Project in a Nutshell
- Downloading GlassFish ESB Installer
- Downloading and Installing the JAR Files and the NBM Files
  - To Install the JAR Files in FTP Binding Component
  - To Install the NBM Files in FTP Binding Component
- Starting the GlassFish V2 Application Server
  - To Start the GlassFish V2 Application Server
- Working With JBI Runtime Environment
  - To View the Installed or Deployed JBI Components
- FTP Binding Component Runtime Configuration Properties
- Creating a BPEL Module Project : SendInventory
  - To Create a BPEL Module Project
- Creating a WSDL Document : Using FTP
  - To Create a WSDL Document : ftpTransfer
  - To Modify ftp:message Properties
  - Poll Request Wizard Properties
- FTP Binding Component Extensibility Elements
- Runtime Configuration
  - FTP Operation Element (<ftp:operation>)
  - FTP Binding Element (<ftp:binding>)
  - FTP Transfer Element (<ftp:transfer>)
  - Pattern Matching
  - FTP Address Element (<ftp:address>)
  - FTP Message Element (<ftp:message>)
- Creating a WSDL Document : Using FILE
  - To Create a WSDL Document : fileTrigger
- Creating a BPEL Process
  - To Create a BPEL Process
  - To Add a Partner Link
  - To Add Web Services and Basic Activities
  - To Edit Web Service : Receive1
  - To Edit the Web Service : Invoke1
  - To Edit the Basic Activities : Assign1
- Validating BPEL
  - To Invoke Explicit Validation
- Design View : Notifications
  - The Design View
- Creating a Composite Application
  - To Create a Composite Application
  - Deploying the Composite Application
  - To Deploy the Composite Application
- Working With Various Binding Types
- Exploring XML Schema
  - About the Schema View
- Creating the XML Schema
  - To Create XML Schema
  - To Add a Complex and a Global Complex Type to the XML Schema
  - To Add Element to the XML Schema
  - To Add Elements to the XML Schema
Understanding the LDAP Binding Component
- About LDAP
- About LDAP Binding Component
  - Defining LDAP Binding Component
  - What's Inside the LDAP Binding Component
- Supporting Features in LDAP Binding Component
  - Platform Support
  - Server Support
Using the LDAP Binding Component in a Project
- Tutorial Overview
- Tutorial Requirement
  - Software Needed for the Tutorial
- Tutorial Plan
- LDAP Binding Component Project in a Nutshell
- Functional Architecture of LDAP Binding Component
- Downloading GlassFish ESB Installer
- Downloading and Installing the JAR Files and the NBM Files
  - To Install the JAR Files in the LDAP Binding Component
  - To Install the NBM Files in LDAP Binding Component
- Starting the GlassFish V2 Application Server
  - To Start the GlassFish V2 Application Server
  - To Start the JBI Components
- Creating a BPEL Module Project For the Add Feature
  - To Create a BPEL Module Project
- Creating a WSDL Document : Add Feature
  - To Create a WSDL Document : Add Feature
  - WSDL View
- Create a WSDL Document For Type : SOAP
  - To Create a WSDL Document : SOAP
- Creating a BPEL Process
- Creating a Composite Application Project
  - To Create a Composite Application Project
- Deploying a Composite Application
  - To Deploy a Composite Application
- Testing the Composite Application
  - To Test the Composite Application
  - Source View
- Design View: Notification
- Create a WSDL Document : Search
- Create a WSDL Document : Update Feature
- Create a WSDL Document : Delete Feature
Using the JMS JCA Wizard
- Using the JMS JCA Wizard
Using the JAXB Wizard and Code-Seeder Pallete
- Understanding the JAXB Binding Process
  - To Perform a Typical JAXB Binding Process
- The JAXB Wizard
  - Code-Seeder Palette (JAXB) Wizard Editor Palette Actions
Understanding the Database Binding Component
- About Database Binding Component
  - Components of Database Binding Component
- Supporting Features in Database Binding Component
- Open ESB Packages that Make Up the New Database Binding Component
- Functional Architecture of Database Binding Component
  - Functional Architecture of the JDBC Binding Component -- Comparative Study
Using the Database Binding Component
- Tutorial Overview
- Tutorial Requirement
  - Software Needed for the Tutorial
- Tutorial Plan
- Downloading GlassFish ESB Installer
- Downloading and Installing the JAR Files and the NBM Files
  - To Install the JAR Files in Database Binding Component
  - To Install the NBM Files in Database Binding Component
- Database Binding Component Project in a Nutshell
- Starting the GlassFish V2 Application Server
  - To Start the GlassFish V2 Application Server From NetBeans IDE
- Creating a BPEL Module Project For Table Type Operations
  - To Create a BPEL Module Project
- Connecting to a MySQL Database
  - To Connect to a MySQL Database
- Working With Administration Console
  - To Start Administration Console
- Setting Up Database Access
  - Integrating a JDBC Driver
  - Creating a JDBC Connection Pool
  - To Create a JDBC Connection Pool
  - To Create a JDBC Resource
- Creating a WSDL Document For Type : DATABASE
  - To Create a WSDL Document : dbWSDL
  - To Select the Database Connection
  - To Edit the SQL
  - Source View
- Creating a WSDL Document For Type SOAP
  - To Create a WSDL Document : SOAPWSDL
- Creating a BPEL Process
  - To Create a BPEL Process
  - To Add a Partner Link
  - To Add a Web Service and Basic Activities
  - To Edit Web Service : Receive1
  - To Edit the Web Service : Invoke1
  - To Edit the Web Service : Reply1
  - To Edit the Basic Activities : Assign1
  - To Edit the Basic Activities : Assign2
- Validating BPEL
  - To Invoke Explicit Validation
- Design View : Notifications
  - The Design View
- Creating the Composite Application Project
  - To Create the Composite Application Project
- Deploying and Testing the Composite Application
  - To Deploy the Composite Application
  - To Test the Composite Application
  - Debug the Test Case
- Creating a BPEL Module Process Using Prepared Statements
- Creating a BPEL Module Project Using Procedures
- Creating a BPEL Module Project Using SQL File
Using the WSDL Editor
- Prerequisites for This Tutorial
- About the WSDL Editor
- Source View
  - Using Code Completion in WSDL Files
- WSDL View
- Partner View
- Working with WSDL Files
Migrating From eTL to Sun Data Integrator
- About Migration to Sun Data Integrator
- Uploading the eTLMigrationTool SAR File to a Repository
  - To Upload the eTLMigrationTool SAR File
- Importing eTL Projects Into Java CAPS 6
  - To Import an eTL Project
- Building Data Integrator Projects
  - To Build a Data Integrator Project
- Creating, Configuring, and Building BPEL 2.0 Modules for Data Integrator
  - To Use the Data Integrator Web Service in a BPEL 2.0 Module
- Configuring Repository-based Projects to Use Data Integrator
  - To Use the Data Integrator Web Service in a BPEL 1.0 Module
- Using Data Integrator Components as JBI Modules in Composite Applications
  - To Use the Data Integrator Web Service in a BPEL 2.0 Module
Designing Intelligent Event Processor (IEP) Projects
- Intelligent Event Processor Overview
- Basic Workflow
- Introduction to IEP Operators
- Aggregator Operators
- Correlation and Filter Operators
- Input Operators
- Output Operators
- Relation Converter Operators
- Relation Operators
  - Distinct
  - Intersect
  - Minus
  - Union
  - Union All
- Sequence Operators
  - Contiguous Order
  - Gap Window
- Stream Converter Operators
- WSDL Documents in IEP Module Projects
- Understanding the IEP Database
- Configuring Message Reliability in an IEP Module Project
  - To Disable Message Reliability for Outbound Messages
Designing Data Integrator Projects
- About Data Integrator
- Extracting, Transforming, Loading: ETL
- Sun Data Integrator Overview
- Sun Data Integrator Architecture
- Data Integrator Recovery
- Creating Sun Data Integrator Projects
- ETL Collaboration Overview
- Configuring ETL Collaborations
- Fine-Tuning the ETL Process
- Grouping Input Data
  - To Group Input Data
- Viewing and Modifying Table Data
  - To View and Modify Table Data
Using the Sun Data Mashup Engine
- Sun Data Mashup Engine Overview
  - Data Mashup Prerequisites
- Configuring and Starting the Sun GlassFish Enterprise Server
  - To Start the Sun GlassFish Enterprise Server
- Designing Data Mashup Projects
  - To Design a Data Mashup Project
- Configuring Data Mashup Projects Using Joins
  - To Add a Join
  - To Edit a Join Condition
- Creating and Deploying a Composite Application to Complete a Data Mashup Project
  - To Create and Deploy a Composite Application
- Testing the Deployment of a JBI Composite Application
  - To Test the JBI Application Deployment
- Viewing the Data
  - To Select the Columns That are Exposed in the Browser
  - To Invoke a Web Service with the HTTP Binding Component
- Sun Data Mashup Engine Application Configuration
  - To Configure the Data Mashup Application Engine
- Sun Data Mashup Engine REST Support
- Known Data Mashup Issues

Give Us Your Feedback

We would like to know what you are thinking.

Sun Java CAPS Documentation

Give Us Your Feedback