|
Table of Contents
Aurora Technologies
Card Name: Aries 16000P
Product Type: Serial Interface
Vendor Name: Aurora Technologies
Description: This board supplies 16 full-duplex asynchronous ports at speeds up to 115Kps on each port through an adapter supplied with the board and driver.
|
F-Code Firmware on board? |
YES |
|
Energy Star Compatible? |
NO |
Basic Tests per Platform/Solaris Revision(s) (See NOTE A)
|
Venue: |
Sun I/ O Testing Lab |
|
Driver packages tests with: |
(AURAsio16 Aurora 1600SE/ 8000P/ 16000P device driver (Solaris 2.5+)( sparc) 5.14qa6) |
|
1. Workstation (Ultra30): |
2.5.1 HW497 TESTED |
|
2. Desktop Server (Ultra 450): |
2.5.1 HW497 TESTED |
| 3. Enterprise Server (E3000): |
2.5.1 HW497 TESTED |
|
4. UltraAX in standard PC box: |
2.5.1 HW497 TESTED |
|
5. Low-end Workstation (Ultra10): |
2.5.1 HW497 TESTED |
Functional Tests Completed (Multiple Entries Possible)
| Sun I/ O Testing Lab |
| Sun, Vendor |
| All above |
| 2.5.1 HW497 |
| No special add-ons |
(Number of CPUs, other PCI boards, expanders, etc.)
Bit3 PCI Expander box with 7 cards, including Adaptec 2940 and Fore ATM. The rest of the box was filled with Aurora 8000P and 16000P cards.
- Port-To-Port Loopback testing at 115KBps between two different ports via a loopback cable.
- Single Port Loopback testing on several ports.
|
| NO ERROR observed. Verified functional tests PASSED. |
Product Test Notes/Warnings
To determine how many serial port devices are created, type the following commands at the system prompt.
- Change directories to the serial devices location:
- List all the devices for which ports are created:
NOTE A: Basic tests include:
- pkgadd/ pkgrm
- Boot verification (The system boots UNIX with card installed)
PCI 2.1 compliance (Tests PCI hardware interface)
| 
